এখন নিবন্ধন করুন

প্রবেশ করুন

হারানো সুরক্ষাচাবি

আপনার পাসওয়ার্ড হারিয়েছেন? আপনার ইমেইল ঠিকানা লিখুন. আপনি একটি লিঙ্ক পাবেন এবং ইমেলের মাধ্যমে একটি নতুন পাসওয়ার্ড তৈরি করবেন.

পোস্ট যোগ করুন

পোস্ট যোগ করতে আপনাকে অবশ্যই লগইন করতে হবে .

প্রশ্ন যোগ করুন

আপনাকে একটি প্রশ্ন জিজ্ঞাসা করতে লগইন করতে হবে.

প্রবেশ করুন

এখন নিবন্ধন করুন

Scholarsark.com এ স্বাগতম! আপনার নিবন্ধন আপনাকে এই প্ল্যাটফর্মের আরও বৈশিষ্ট্যগুলি ব্যবহার করার জন্য অ্যাক্সেস প্রদান করবে. আপনি প্রশ্ন করতে পারেন, অবদান রাখুন বা উত্তর প্রদান করুন, অন্যান্য ব্যবহারকারীদের প্রোফাইল দেখুন এবং আরও অনেক কিছু. এখন নিবন্ধন করুন!

Digital Logic Circuits and Design

Digital Logic Circuits and Design

দাম: $19.99

মাভেন টিউটোরিয়াল, আপনি সক্ষম হবেন

1. Understand all the fundamentals of number systems and performing conversion between them.

2. Function of logic circuits and how to design them.

3. Classify Combinational Logic and Sequential Logic.

4. How to design a combinational logic circuit for a given scenario with the minimum number of gates possible.

5. Use all the standard techniques to minimize the logic gate requirements

6. Design sequential logic circuits like Counters and Shift Registers using Flip flops.

7. Understand the working of various flip flops and latches and highlight the difference between them.

If you’re an aspirant who belong to the field of Computer Science, Electronics and Information Technology, Then this course will strongly build the foundations of the digital electronics in you.

Objective of the course is to make everyone design a digital circuit efficiently using various components.

Digital systems contain information that is represented as binary digits called bits.

The alphabet of these bits is the set {0, 1}, which represents the logical value of the

বিট. The physical value is determined by the logic family being used. The transistor-transistor

logic (টিটিএল) family represents a logic 0 typically as + 0.2 volts and a logic 1

typically as + 3.4 volts using a + 5 volt power supply; the emitter-coupled logic (ECL)

100K family represents a logic 0 typically as – 1.7 volts and a logic 1 typically as –0.95

volts using a – 4.5 volt power supply.

এইভাবে, a signal can be asserted either positive (প্লাস) or negative (একটি সাধারণ গ্রহাণুর পৃষ্ঠের গড় তাপমাত্রা মাইনাস), depending

upon the active condition of the signal at that point. The word positive, as used

এখানে, does not necessarily mean a positive voltage level, but merely the more positive

of two voltage levels, as is the case for ECL.

সম্পর্কিত আর্কাডমিন

উত্তর দিন