Зарегистрироваться

Авторизоваться

забытый пароль

Забыли пароль? Пожалуйста, введите свой адрес электронной почты. Вы получите ссылку и создать новый пароль по электронной почте.

Добавить запись

Вы должны войти в систему, чтобы добавить запись .

Добавить вопрос

Вы должны авторизоваться, чтобы задать вопрос.

Авторизоваться

Зарегистрироваться

Добро пожаловать в Scholarsark.com! Ваша регистрация даст вам доступ к использованию больше возможностей этой платформы. Вы можете задавать вопросы, вносить свой вклад или дать ответы, просматривать профили других пользователей и многих других. Зарегистрироваться!

Hands on projects with the I2C protocol – Learn by doing!

Hands on projects with the I2C protocolLearn by doing!

Цена: $49.99

Welcome to this course on embedded systems for STM32: I2C protocol masterclass. The I2C communication protocol is a popular protocol that microcontrollers use to talk to various devices such as EEPROMS and NVRAMs, ADCs and DACs, I/O interfaces for port expansion, and a whole array of different types of sensors. This class goes in-depth into the theory behind the I2C protocol, why it was originally designed, what types of common formats are available, and how to implement I2C communication between a STM32 microcontroller, a LTC2990 current, voltage and temperature sensor and an OLED display.

Кто я?

я Акшай, и я буду вашим инструктором на этом курсе. Я был очарован микроконтроллерами с детства, и теперь я считаю, что мне повезло, что это моя профессия. В настоящее время я пишу прошивки для критических систем безопасности, которые устанавливаются внутри электромобилей.. С моим знанием встроенных систем в прошлом 10+ лет, и работа в Кремниевой долине, Я получил уникальное представление о том, что нужно отрасли и чего не хватает студентам.

Структура курса

The course is divided into four sections

Раздел 1In this section you will learn the theory behind the I2C protocol and how to implement it effectively.

Раздел 2In this section you will set up a free and open source development environment to program and debug ARM Cortex microcontrollers. If you have previously completed my course on the Foundations of ARM Cortex-M processors, then you may choose to skip to the next section.

Раздел 3In this section you will get hands-on experience on how to write the I2C drivers for the LTC2990 temperature, current and voltage sensor and the SSD1306 OLED display. You can take the knowledge learned in this section and apply it to any other I2C device of your choosing.

Раздел 4In this section you will unlock features of the I2C Shield with specially designed assignments. After each assignment I will show you my method of implementation for comparison.

What hardware is needed for this course?

This course is created around the Nucleo series of boards from ST Microelectronics and I have designed, specifically for this course a custom board that fits on top of the Nucleo board. The Nucleo board is available for purchase directly from ST Micro and the custom I2C board can be purchased on www(точка)makermax(точка)ca to allow you to get hands-on without having a whole electronics lab at your desk. Although this hardware is recommended, it is not mandatory. If you choose not to buy the hardware, you will still be able to follow along through all the lectures as I will show you my implementation. The best way to learn however, is to try and implement it yourself. If you have further questions on the hardware or anything else, send me a message! I would be more than happy to help you.

Около arkadmin

Оставьте ответ